1592026260 IEV22-24D GB r.1.0 21.02.2019 IEV 13/60
3.7 Modifying the superheating set point
Proceed as follows to modify the superheating set point:
• press SET for 5 seconds
• the superheating set point of valve 1 flashes
• press to modify the superheating set point
• press SET to confirm the value
• the superheating set point of valve 2 (if present) flashes
• press to modify the superheating set point
• press SET to confirm the value and return to the normal display
3.8 Viewing Parameters of level Pr1
Proceed as follows to view the parameters:
• press SET and simultaneously for 5 seconds
• press to view the desired parameter
• press SET and simultaneously to exit from viewing the parameters
To Next Page
Loading...
