Emerson Dixell IEV24D User Manual

1592026260 IEV22-24D GB r.1.0 21.02.2019 IEV 15/60
How to modify visibility level
To modify the visibility lev of a parameter from Pr1 to Pr2 or from Pr2 to Pr1 is necessary:
• enter programming parameters level Pr2
• select the parameter
• push SET key and hold it down then press key
• if the dot point on parameter label is lighted, it means that the parameter is visible also in
Pr1 visibility level
• repeat above procedure to make the parameter visible or not in Pr1 level
Parameter displayed also in Pr1

Emerson Dixell IEV24D Specifications

General

Brand	Emerson
Model	Dixell IEV24D
Category	Controller
Language	English