1592028040 XWEB300D_500D_PRO STP GB r1.0 25.11.2020.doc XWEB PRO 16/20
6.6 WIFI CONNECTIVITY
This type of connection will allow you to directly access XWEB from a device equipped with a Wifi
connection, or to allow XWEB to access an already configured wifi network. A prerequisite for these types of
connectivity is the installation of the WIFI dongle in the XWEB USB port.
ATTENTION: Only use dongles officially supported by this monitoring unit.
i. Connecting a mobile device to the XWEB access-point
XWEB is normally supplied preconfigured in this mode so that the user can search with his PC / smartphone
/ tablet to an "XWEB-EVO" SSID network. The default password is “dixellxwebpro”.
i. Connection of XWEB to existing wifi network
XWEB can be connected via wifi to a Wifi-AccessPoint already present on the site. In this case, you need to
temporarily access the xweb interface with another type of connection (typically with a crossed cable) to
change the connection configuration parameters.
Configuration changes can be made by the user after accessing the user interface from the
System→Settings→Network menu.
ATTENTION: no access to port 22 service is provided in wifi
To Next Page
Loading...
Need help?
General
