1592028040 XWEB300D_500D_PRO STP GB r1.0 25.11.2020.doc XWEB PRO 4/20
The product is not suitable for environments subject to mechanical vibrations and
does not withstand shocks. It must be installed in a dry and clean environment.
The customer shall bear full responsibility and risk for product configuration in order
to achieve the results pertaining to installation and/or final equipment/system. Upon
the customer's request and following a specific agreement, Dixell s.r.l. may be
present during the start-up of the final machine/application, as a consultant,
however, under no circumstances can the company be held responsible for the
correct operation of the final equipment/system.
Since Dixell products form part of a very high level of technology, a
qualification/configuration/programming/commissioning stage is required to use
them as best as possible. Otherwise, these products may malfunction and Dixell
cannot be held responsible. The product must not be used in any way that differs
from that stipulated in the documentation
To Next Page
Loading...
