Emerson EIM E796 M2CP - 5.2 Quarter-Turn Model P, Q, R & M

16
Installation and Maintenance Manual
E2K-402-0817 Rev. 2 August 2017
Multi-turn Actuators
5.2 Quarter-Turn Model P, Q, R & M
Top-mount P, Q and R and several models of M/MG’s side-mount do not require MDPI gear
reduction assembly for 1-turn Pot. If multi-turn Pot is required, EIM JOB SPEC SHEET will list
84131-0000 or the correct assembly. Spec Sheet will list,(1) Pot clutch gear, (2) Pot input
gear and (3) potentiometer.
Figure 12
(1) Clutch Gear
(2) Pot Input
Gear
(3) Potentiometer
Section 5: Multi-turn Actuators