Emerson ELQ 100 - EC-Declaration of Conformity

TM
16
Installation Operation & Maintenance manual ELQ
DOC.55.EDN Rev: E
October 2012
8 EC-DECLARATION OF CONFORMITY
ROC 5030
Rev C
Emerson Process Management, Asveldweg 11
7556 BR Hengelo (Ov.) The Netherlands
above mentioned European Directives.
Description:
• Electric actuator
Type:
• ELS 18, ELS25, EL35, EL55, EL100, EL150, EL200, EL350, EL500, EL800, EL1200, EL2500
• ELQ100, ELQ200, ELQ300, ELQ500, ELQ800
Application area:
• See manual "Installation and Operation"
Serial No.:
•
EC-Declaration of conformity
in accordance with:
EMC Directives 2004/108/EC
ATEX Directive 94/9/EC
EMC Directive
EL EMC
No.:
• 47691-KCS/CE94-4190, 47691-KCS/CE94-4191,
47691-KCS/CE94-4192 (KEMA)
ELQ EMC test report:
• Bolborn EMC Solutions dd. 11-02-1999
Applicable standards:
• EN 50082 EN 50081 EN 61000
ATEX Directive
Type :
• EL35, EL55, EL100, EL150, EL200, EL350, EL500,
EL800, EL1200, EL1600, EL2500
• Marking:
II 2G Ex db IIB T4
•
DEKRA 12ATEX0001 X
Type:
• ELQ100, ELQ200, ELQ300, ELQ500, ELQ800
• Marking:
II 2G Ex db IIB T4
•
DEKRA 12ATEX0002 X
body :
• DEKRA Certification B.V., Notified body no: 0344
Utrechtseweg 310, 6812 AR Arnhem,
The Netherlands
Applicable standards:
• EN 60079-1:2007 and EN 60079-0:2009
EC Declaration of Incorporation
Issued in accordance with the
Machinery Directive
2006/42/EC, Appendix IIb
Essential requirements applied and complied
with:
• 1.1.2, 1.1.3, 1.1.5, 1.2.3, 1.3.2, 1.3.4, 1.5.1, 1.5.2,
1.5.4, 1.5.7, 1.5.11, 1.5.16, 1.7.1, 1.7.3 and 1.7.4
• Technical documentation is drafted in compliance
with Appendix VII, section B.
• Before the actuator is put into operation, the ma-
chine into or onto which the actuator will be installed,
must comply with the stipulations of the machinery
directive.
• The relevant information concerning the partly com-
pleted machinery will be available in the event of a
motivated request from national authorities.
Applicable standards:
• EN ISO 14121-1:2007 NEN-EN 60204:1992
Signed : _____________________________
Name : E. Saussaye
Position : Vice President
Emerson Process Management,
Valve Automation Europe
Date : 2012-02-14
Place : Hengelo, The NetherlandsEN