Emerson FB1200 - Safety First

FB1200 Flow Computer Quick Start Guide
D301786X012
November 2023
1
Safety First!
Never perform the installation/setup activities described in this document in a
hazardous area. Ensure the area is non-hazardous.
DANGER
EXPLOSION HAZARD: Never remove end cap(s) in a hazardous location. Removing end
cap(s) in a hazardous location could result in an explosion.
DANGER
EXPLOSION HAZARD: Ensure the area in which you perform this operation is non-
hazardous. Performing this operation in a hazardous area could result in an explosion.
Important
Use only batteries supplied with the flow computer or sold by Emerson as spare parts
for this flow computer. If you substitute a battery you obtain elsewhere you will void
your certification unless it is the identical part from the same manufacturer as that
supplied with the flow computer from Emerson.
DANGER
EXPLOSION HAZARD - Substitution of any components may impair suitability for Class I,
Division 1 or Class I, Division 2.
DANGER
EXPLOSION HAZARD - Do not disconnect equipment unless power has been removed or
the area is known to be non-hazardous.