Parts
March 2006
11-3
Key Description Part Number
12 PTFE Sleeve Kit [For pot bushing assembly (kit includes
10 sleeves and lubricant)]
DVC6010f and DVC6020f GE08726X012
DVC6030f GE08727X012
13 Spare Module Base Assembly Kit, aluminum
[kit contains module base assy (key 2); drive screws, qty 2,
(key 11); shield/label (key 19); hex socket cap screw, qty 3,
(key 38); self tapping screw, qty 2 (key 49); pipe plug, qty 3
(key 61); retaining ring, qty 3 (key 154); screen (key 236);
and flame arrestors, qty 3 (key 243)]
GE18654X012
14 Spare Housing Assembly Kit, aluminum
[kit contains housing (key 1); drive screw, qty 2 (key 11);
shield (key 20); and screen (key 71)]
DVC6010/DVC6020 GE18652X012
DVC6030 GE18653X012
Remote Mount Kits
Remote Terminal Box Kit GE00418X012
Feedback Unit
DVC6015 49B7986X012
DVC6025 long arm 49B7987X012
DVC6025 Short Arm 49B7987X022
DVC6035 49B7988X012
Feedback Unit Termination Strip Kit GE00419X012
Pipestand/Wall Mounting Kit GE00420X012
Parts List
Parts which do not show part numbers are not
orderable as individual parts. In most cases, they are
available in one of the parts kits listed under Parts
Kits.
Note
Parts with footnote numbers shown are
available in parts kits. Also see footnote
information at the bottom of the page.
Key Description Part Number
Common Parts
1 Housing
Aluminum
DVC6010f and DVC6020f 48B7709X012
DVC6030f 48B9604X012
316 SST
DVC6010f and DVC6020f GB0113X0012
DVC6030f GB0114X0012
Key Description Part Number
43 Cover Assembly (includes cover screws)
Aluminum
Standard 38B9580X012
Extreme termperature option
(fluorosilicone elastomers) 38B9580X032
Stainless Steel
Standard 38B9580X022
Extreme termperature option
(fluorosilicone elastomers) 38B9580X042
48 Nameplate
52 Vent, plastic
(2)
63 Lubricant, lithium grease (not furnished with the instrument)
64 Anti-Seize compound (not furnished with the instrument)
65 Lubricant, silicone sealant (not furnished with the instrument)
74 Mounting Bracket
DVC60005 and DVC6020 only
Std
(3)
or pipe-away
(6)
75* O-Ring, nitrile
(6)
DVC6020 Vent-away only
128 Pipe Plug, pl stl
(6)
DVC6020 Vent-away only
237 Module Base Seal
(1)
Module Base
The following parts are included in the module
base.
2 Module Base Assembly
12* O-ring, nitrile
(1)
16* O-ring, nitrile
(1)
(3 req’d)
24 Relay Module (See Relay listing)
33 Mach Screw, pan hd, SST
(2)
(3 req’d)
38 Cap Screw, hex socket, SST
(2)
(3 req’d)
41 I/P Assembly (See I/P Assembly listing)
154 Retaining Ring
(2)
(3 req’d)
I/P Converter Assembly
23 Cap Screw, hex socket, SST
(2)
(4 req’d)
39* O-ring nitrile
(1,9)
41 I/P Converter
(9)
169 Shroud
(9)
210* Boot, nitrile
(1,9)
(2 req’d)
231* Seal Screen
(1,7,9)
11
* Recommended spare
1. Available in the Elastomer Spare Parts Kit
2. Available in the Small Hardware Spare Parts Kit
3. Available in the DVC6010 to DVC6020 Conversion Kit
6. Available in the Pipe-Away Bracket Kit
7. Available in the Seal Screen Kit
9. Available in the I/P Converter Kit