Emerson IC695PNS001-BHBF1 2 - Supported Modules, Power Supplies, and Backplanes

GFK-2738AE Jan 2024
1
2. Assigning an I/O Device Name to the PNS
Before attempting to connect to or configure the RX3i PNS, the I/O Device Name must be set with a
Discovery and Configuration Protocol (DCP) tool, such as the PAC Machine Edition Discovery Tool.
3. Configuring the PNS and its I/O Modules on a PROFINET network
PAC Machine Edition is the primary tool used to configure an RX3i PROFINET network. The PNS must
be installed in the slot that is selected in the module’s hardware configuration. The GSDML file for the
RX3i PNS is included in the firmware upgrade kit. If the version of the GSDML file in the firmware upgrade
kit is not already present in the PAC Machine Edition tool chest, import the newer GSDML into PME to
enable new features.
Supported Modules, Power Supplies, and
Backplanes
The following modules can be used with this release of the RX3i PROFINET Scanner I/O Device:
Catalog Number
Module Description
Distinguishing Classes
3
Discrete Input Modules
IC693ACC300
Input Simulator Module (8pt & 16pt operation)
8 in, 16 in
IC693MDL230
8 Circuit Input 120 Vac Isolated
8 in
IC693MDL231
8 Circuit Input 240 Vac Isolated
8 in
IC693MDL240
16 Circuit Input 120 Vac
16 in
IC693MDL241
16 Circuit Input 24 Vac / Vdc
16 in
IC693MDL250
16 Circuit Isolated Input 120 Vac, Input Filtering Off
16 in
IC693MDL250
16 Circuit Isolated Input 120 Vac, Input Filtering On
none
IC693MDL260
32 Circuit Input 120 Vac, Input Filtering Off
32 in
IC693MDL260
32 Circuit Input 120 Vac, Input Filtering On
32 in/out
IC693MDL632
8 Circuit Input 125 Vdc Positive / Negative Logic
8 in
IC693MDL634
8 Circuit Input 24 Vdc Positive / Negative Logic
8 in
IC693MDL635
16 Circuit Input 125 Vdc Positive / Negative Logic
16 in
IC693MDL645
16 Circuit Input 24 Vdc Positive / Negative Logic
16 in
IC693MDL646
16 Circuit Input 24 Vdc Positive / Negative Logic Fast
16 in
IC693MDL648
16 Circuit Input 48 Vdc Positive / Negative Logic Fast
16 in
IC693MDL654
32 Circuit Input 5/12 Vdc Positive / Negative Logic
32 in
IC693MDL655
32 Circuit Input 24 Vdc Positive / Negative Logic Fast
32 in
IC693MDL660
32 Circuit Input 24 Vdc Positive / Negative Logic, Input Filtering Off
32 in
IC693MDL660
32 Circuit Input 24 Vdc Positive / Negative Logic, Input Filtering On
32 in/out
IC694ACC300
Input Simulator Module (8pt & 16pt Mode)
8 in, 16 in
IC694MDL230
8 Circuit Input 120 Vac Isolated
8 in
IC694MDL231
8 Circuit Input 240 Vac Isolated
8 in
IC694MDL240
16 Circuit Input 120 Vac
16 in
IC694MDL241
16 Circuit Input 24 Vac / Vdc
16 in
3
The PNS cannot distinguish between modules within the same Distinguishing Class type. This means that any module physically present
that is within the same class as the one configured will not alert the user with a System Configuration Mismatch fault on the Controller Fault
Table. Refer to the section entitled CPU operation during System Configuration Mismatch Faults in PACSystems and RX3i CPU Reference
Manual, GFK-2222.