Emerson IC695PNS001-BHBF1 2 - Specifications

GFK-2738AE Jan 2024
1
Current Release Information
PACSystems RX3i PROFINET Scanner (PNS), IC695PNS001, and Advanced PROFINET Scanner
IC659PNS101 Release 3.41 resolves issues found in Section Problems Resolved by this Revision.
Firmware Version Numbers
Firmware Component
Version Number
PNS001-Bxxx / PNS101-Axxx Primary Firmware
Release 3.41 Build ENB6
PNS001-Bxxx / PNS101-Axxx Boot Firmware
Release 1.08 Build EKJU
New Features and Enhancements
There are no new features or enhancements in this release.
Ordering Information
Part Number
Description
IC695PNS001
PACSystems RX3i PROFINET Scanner Module 10/100/1000 with four Ports
(two SFP connections, two RJ45 connections)
Includes a blank SD card
IC695PNS001CA
Conformal Coated PACSystems RX3i PROFINET Scanner Module 10/100/1000 with four Ports
(two SFP connections, two RJ45 connections)
Includes a blank SD card
IC695PNS101
PACSystems RX3i Advanced PROFINET Scanner Module 10/100/1000 with four Ports
(two SFP connections, two RJ45 connections)
Includes a blank SD card
IC695PNS101CA
Conformal Coated PACSystems RX3i Advanced PROFINET Scanner Module 10/100/1000 with
four Ports (two SFP connections, two RJ45 connections)
Includes a blank SD card
IC695SPC100
RX3i 10/100/1000 Base-T copper SFP
IC695SPF002
RX3i 100Base-FX (fiber 2 km) SFP (Multi-mode fiber - MMF)
IC695SPF550
RX3i 1000 Base-SX (fiber 550 m) SFP (MMF)
IC695SPF010
RX3i 1000 Base-LX (fiber 10 km) SFP (Single-mode fiber - SMF)
Specifications
Specifications
Descriptions
PROFINET Support
PROFINET Version 2.3 Class A I/O Device
Redundantly controlled operation implements PROFINET V2.3 Type S-2 System
Redundancy
PAC Machine Edition
Version Required
PNS001 & PNS101: Version 8.50 SIM 2 or later