Emerson IC695PNS001-BHBF1 2 - Release History

GFK-2738AE Jan 2024
5
Release History
Version
Firmware
Revision
Date
Comments
IC695PNS001-BHBF
IC695PNS101-AFAD
3.41
Jan 2024
Manufacturing component issues.
IC695PNS001-BHBF
IC695PNS101-AFAD
3.40
May 2023
MRP Fiber SFP Ring break detection during a single fiber break
Support for -JC or later backplanes
IC695PNS001-BHBF
IC695PNS101-AFAD
3.36
Sep 2022
Manufacturing component issues.
IC695PNS001-BGBE
IC695PNS101-AEAC
3.35
July 2022
Adds support for MODBUS Master and Slave exchanges using up to
four IC695CMM002/004 RX3i Serial Communications Modules.
Adds support for the IC695PSD180 Multifunctional 24VDC 80W
Power Supply.
IC695PNS001-BGBE
IC695PNS001CA-
BGBE
IC695PNS001LT-BGBE
IC695PNS101-AEAC
IC695PNS101CA-AEAC
IC695PNS101LT-AEAC
3.30
Oct 2021
The product's labels have been updated to show compliance with
new certifications.
For updated certifications, please refer to https://emerson-
mas.my.site.com/communities/en_US/Article/Certifications-and-
Agency-Approvals-Landing-Page.
IC695PNS001-BFBE
IC695PNS101-ADAC
3.30
May 2021
Enhances Sequence of Events recording to support up to five
PNS101s when used with the IC695CPE330 64MB CPU w/Ethernet,
IC695CPE400 64MB Rackless CPU, or IC695CPL410 64MB
Rackless CPU. This release also resolves the issues found in
Problems Resolved by this Revision
IC695PNS001-BFBE
IC695PNS101-ADAC
3.26
Jan 2021
Resolves quality issues.
IC695PNS001-BFBE
IC695PNS101-ADAC
3.25
Sep 2020
Manufacturing update. No change to fit, form, or function.
IC695PNS001-BDBE
IC695PNS101-ACAC
3.25
Mar 2020
Adds support for Sequence of Events capture from IC694MDL655
modules in the PNS101 rack.
Resolves issues described in the section entitled Problems Resolved
by this Revision
IC695PNS001-BDBE
2
IC695PNS101-ACAC
3.20
Oct 2019
Added support for the IC694MDL730 & IC694MDR390, rebranded
the PNS001/PNS101 and GSDML to Emerson, and applied patches
for VxWorks URGENT/11 vulnerabilities.
Resolves issues described in the section entitled Problems Resolved
by this Revision.
IC695PNS001-BBBD
IC695PNS101-AAAB
3.15
Oct 2018
Updates to enhance cyber security.
IC695PNS001-BBBC
IC695PNS101-AAAA
3.10
Aug 2018
Initial release of the IC695PNS101 Advanced PROFINET Scanner.
Added support for the IC695HSC304 High-Speed Counter Module
with 4 Counters.
IC695PNS001-BBBB
3.01
Jan 2018
Hardware change increases isolation between Earth ground and
signal ground. Removes incorrect statement in IPI revision N
regarding RX3i backplane compatibility.
IC695PNS001-BABB
3.01
Aug 2017
Addresses issues with SDcard communication on some assemblies.
IC695PNS001-BABA
3.00
Feb 2017
New hardware platform with a new layout of front panel LEDs and
Ethernet connector replaces front-panel USB for firmware update.