Need help?Do you have a question about the Emerson iPro.Genius and is the answer not in the manual?
General| Manufacturer | Emerson |
|---|---|
| Model | iPro.Genius |
| Power Supply | 24 VDC |
| Enclosure Rating | IP20 |
| Certifications | CE, UL, cUL |
| Controller Type | PLC |
| Communication Protocols | Modbus TCP/IP, Ethernet/IP |
| Inputs | Digital, Analog |
| Outputs | Digital, Analog |
| Programming Language | IEC 61131-3 (LD, FBD, ST, IL, SFC) |
Details powering the DAC using 24VAC transformers, including transformer size recommendations and wiring.
Details the DAC's ability to use physical or network inputs, including analog and digital sensor connections.
Describes the DAC's 15 relay outputs and 6 analog outputs for controlling loads and features.
Covers DAC's two active space temperature setpoints (cooling and heating) and how they initiate modes.
Describes how the DAC determines supply air temperature setpoint based on heating/cooling activity and terminal load.
Covers DAC's support for single-speed or variable-speed (VS) fans, controlled based on application mode (CAV or VAV).
Details the DAC's dehumidification methods using mechanical cool stages or a dedicated device.
Covers the use of the outside air damper for economization, indoor air quality, and make-up air strategies.
Details how the DAC compensates for sensor failures and the implications of supply temperature sensor failure.
Explains how to verify and adjust sensor readings for accuracy using calibration offsets in the E2.
To Next Page