Discharge Air Controller (DAC) Manual E2 Setup • 31
it.
8.3. Viewing the DAC Status
Screen
Once you have added an DAC to the E2, you will
be able to see the status of the DAC board(s) from the
front panel.
1. From the Main Status Screen, press key and
select
- Configured Applications.
2. Select DAC from the menu. If multiple DACs are
associated with this E2, the DAC Summary Screen
will be shown. To see a single DAC status screen,
use the arrow keys to highlight the DAC you wish
to view, and press
.
Figure 8-7 - Network Summary Screen
To Next Page
Loading...
