Emerson IC695PNS001-BHBF1 2 - Field Upgrade

GFK-2738AE Jan 2024
6
Version
Firmware
Revision
Date
Comments
Firmware is not compatible with previous hardware revisions (-
AXXX).
IC695PNS001-BABA is Achilles Level 1 Certified.
IC695PNS001-ABAK
2.41
Jun 2016
Added support for the Remote Get HART Device Information
COMMREQ. Information from a HART device connected to an RX3i
Analog Module in an IC695PNS001 RX3i PROFINET Scanner may
be read into the user application using the Remote Get HART Device
Information COMMREQ.
IC695PNS001-ABAJ
2.40
Nov 2015
Added support for additional RX3i I/O modules (ALG106, ALG312,
ALG314, ALG608, ALG628, ALG704, and MDL758)
IC695PNS001-ABAH
2.30
May 2015
Added support for HART
®
Pass-Through feature set using HART-
capable RX3i Analog modules. Also added support for I/O Module
Version information via Explore PROFINET Networks in PME.
IC695PNS001-ABAG
2.20
Jun 2014
Added support for IC695ALG600 (Universal Analog Input Module)
and IC694PSM001 (Power and Sync Measurement Module).
IC695PNS001-ABAF
2.10
Apr 2014
Added support for IC695HSC308 (High-speed Counter – 8 Counters).
Resolution of ALG508, ALG616, and ALG708 modules larger
configuration causing an IOC Software - Module Firmware Fault
when more than three were placed in a PNS001 rack.
IC695PNS001-ABAE
2.00
Mar 2014
Added PROFINET System Redundancy (S2 NAP – supports
Redundant connections from two IO Controllers).
Resolution of PROFINET connection losses and RX3i PNS001
connection issues described hieronder.
Added support for additional RX3i I/O modules (ALG112, ALG626
(No HART), ALG728 (No HART), and ALG808)
IC695PNS001-ABAD
1.11
Nov 2013
Resolution to Analog Output Anomaly issue, described in
PACSystems RX3i PROFINET Scanner IPI
, GFK-2738D.
IC695PNS001-ABAC
1.10
Jul 2013
Support for additional RX3i I/O modules (MDL664, MDL765, ALG508,
ALG616, ALG708).
IC695PNS001-ABAA
1.00
Jun 2013
Hardware update for improved manufacturability. No changes to
features, functions, or compatibility
IC695PNS001-AAAA
1.00
Mar 2013
Initial release.
Field Upgrade
Upgrade Kit
Part Number: 41G2416-FW01-000-A11
File Name: 41G2416-FW01-000-A11.zip
Only IC695PNS001-Bxxx and IC695PNS101-Axxx or later revisions are field upgradable to this release using the
upgrade kit listed above. IC695PNS001-Axxx modules cannot be upgraded with this kit due to hardware and
firmware design changes in the PNS001-Bxxx revision.
Release in line with software license compliance requirements.
HART
®
is a registered trademark of the HART Communication Foundation of Austin, Texas USA. Any use of the term HART hereafter in this
document, or any document referenced by this document, implies the registered trademark.