Emerson Liebert GXT3 Series User Manual

Controls and Indicators
21
3.2.2 UPS Status Indicators
UPS status is indicated by five symbols: fault indicator, AC input indicator, battery indicator,
inverter indicator and bypass indicator. Table 5 shows the symbols and their meaning.
Table 5 UPS status indicators
UPS Status
Indicator Icon Color Description
Fault Indicator Red On if the UPS has detected a fault; Off if there is no fault
AC Input Indicator Green
On when the utility input power is normal; Off during utility failure; flashing
when utility power is outside specifications
Battery Indicator Amber
On when the battery is supplying power; Off when the battery is not
supplying power
Inverter Indicator Green
On when the inverter is supplying power; Off when the inverter is not
supplying power
Bypass Indicator Amber
On when the bypass is supplying power; Off when the inverter is not
supplying power; and flashing when utility power is outside specifications

Emerson Liebert GXT3 Series Specifications

General

Model	Liebert GXT3 Series
Frequency	50/60 Hz
Type	Online Double Conversion
Power Capacity	1kVA to 10kVA
Input Voltage	120V, 208V, 230V (depending on the specific model)
Output Voltage	120V, 208V, 230V (depending on the specific model)
Backup Time	Varies by model and load
Form Factor	Tower/Rackmount
Operating Temperature	0 to 40°C (32 to 104°F)
Humidity	0% to 95% (non-condensing)
Dimensions	Varies depending on the specific model
Weight	Varies by model
Battery Type	Valve-regulated lead acid (VRLA)