Emerson Liebert GXT3 Series User Manual

Battery Cabinet
34
8.0 BATTERY CABINET
Optional battery cabinets are available for the Liebert GXT3. The battery port and input breaker are
on the battery cabinet’s rear panel, as shown in Figure 26. For battery cabinet specifications, refer to
Table 12.
For battery run times, refer to Table 14.
Figure 26 Battery cabinet
!
WARNING
Do not contact the battery ports and ground without wearing protective gloves and clothing
and taking other precautions against electrical shock. The battery loop and AC input are not
insulated, which may cause a dangerous voltage between the battery ports and ground.
Battery Ports
Input Breaker

Emerson Liebert GXT3 Series Specifications

General

Model	Liebert GXT3 Series
Frequency	50/60 Hz
Type	Online Double Conversion
Power Capacity	1kVA to 10kVA
Input Voltage	120V, 208V, 230V (depending on the specific model)
Output Voltage	120V, 208V, 230V (depending on the specific model)
Backup Time	Varies by model and load
Form Factor	Tower/Rackmount
Operating Temperature	0 to 40°C (32 to 104°F)
Humidity	0% to 95% (non-condensing)
Dimensions	Varies depending on the specific model
Weight	Varies by model
Battery Type	Valve-regulated lead acid (VRLA)