Emerson Micro Motion H Series User Manual

2 Mounting
2.1 Mount the sensor
Use your common practices to minimize torque and bending load on process connections.
About this task
Tip
To reduce the risk of condensation problems, do not orient transmitters or sensor junction
boxes with their conduit openings pointing upward.
CAUTION
Do not lift the sensor by the electronics or purge connections. Lifting the sensor by
the electronics or purge connections can damage the device.
Figure 2-1: Mounting the sensor
Notes
• Do not use the sensor to support the piping.
• The sensor does not require external supports. The flanges will support the sensor in
any orientation.
Installation Manual
Mounting
20002346 January 2019
Installation Manual 9

Emerson Micro Motion H Series Specifications

General

Brand	Emerson
Model	Micro Motion H Series
Category	Accessories
Language	English