Emerson Powerdrive F300 - Page 27

Powerdrive F300 Getting Started Guide 27
Issue Number: 5
Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting started
Basic parameters
(Menu 0)
Running the
motor
Optimization
NV Media Card
Operation
Further
information
UL listing
information
Figure 3-8 Enclosure layout (size 9 to 11)
Ensure minimum clearances
are maintained for the drive
and external EMC filter. Forced
or convection air-flow must not
be restricted by any object or
cabling
Note
For EMC compliance:
1) When using an external EMC
filter, one filter is required for
each drive
2) Power cabling must be at
least 100mm (4in) from the
drive in all directions
A
B
= 60 mm (2.37 in)
= 45 mm (1.77 in)
B B
A
AC supply
contactor and
fuses or MCB
Locate as
required
Locate as
required
Enclosure
³100mm
(4in)
³100mm
(4in)
9A/9E/10E/11E
Powerdrive F300 Getting Started Guide English Iss2.book Page 27 Tuesday, July 28, 2015 3:23 PM