Emerson Powerdrive F300 - Page 30

30 Powerdrive F300 Getting Started Guide
Issue Number: 5
Figure 3-13 Removal of the size 7, 8 and 9A internal EMC filter and line to ground varistors (size 7
shown)
To electrically disconnect the Internal EMC filter, remove the screw as highlighted above (1).
To electrically disconnect the line to ground varistors, remove the screw as highlighted above (2).
The Internal EMC filter on size 9E, 10E and 11E cannot be removed.
1
2
NOTE
Powerdrive F300 Getting Started Guide English Iss2.book Page 30 Tuesday, July 28, 2015 3:23 PM