Emerson Powerdrive F300 - Page 82

82 Powerdrive F300 Getting Started Guide
Issue Number: 5
7.3.3 Use of the motor database for a Leroy Somer LSRPM motor for use in
RFC-S Sensorless mode
• Select 'Motor Set-up' from the 'Dashboard'.
•
On the 'Motor Set-up' screen, select 'Choose a motor'.
Select the required motor database:
7.3.4 Select the required motor from the list and click 'OK'
The data for the selected motor is displayed on the 'Motor Set-up' screen. Click 'Send to drive' to set the
associated parameters.
Powerdrive F300 Getting Started Guide English Iss2.book Page 82 Tuesday, July 28, 2015 3:23 PM