00809-0100-4835 Rev BE
This manual is designed to assist in installing, operating and
maintaining the Rosemount 3150 Series Pressure
Transmitters. Instructions for the 3152, 3153 and 3154
models are included in this manual. Where differences in
instructions between the models exist, they are noted within
those instructions. The manual is organized into the following
Provides general, mechanical, and electrical installation
Section 3: Calibration
Provides transmitter calibration procedures.
Section 4: Operation
Provides a description of how the transmitter operates.
Section 5: Maintenance and Troubleshooting
Provides basic hardware troubleshooting considerations
including disassembly and reassembly procedures and post
Section 6: Transmitter Spare Parts
Provides order information for transmitter spare parts.
Refer to the applicable Rosemount Qualification/Test Reports,
Product Data Sheets and/or Specification Drawing 03153-
2003 and Specification Drawing 03154-2003 (applicable to
RCC qualified transmitters only) for details on testing,
performance specifications, ordering information, and
dimensional drawings for each model.
Figure 1-1 shows the standard transmitter nameplate and
where transmitter information is stamped onto the nameplate.
Nameplate material is stainless steel.
Figure 1-1 – Standard Transmitter
Nameplate
To Next Page
Loading...
