00809-0100-4835 Rev BE
Overview..................................................................
Safety Messages....................................................
General Considerations.........................................
Mechanical Considerations...................................
Electrical Considerations......................................
Installation Procedures..........................................
This section contains the following installation considerations:
• General Considerations
• Mechanical Considerations
→ Process Connections
→ Impulse Piping
→ Mounting Configurations
→ Conduit Connections
→ Electronics Housing
• Electrical Considerations
→ Signal Integrity
→ Wiring Connections
• Installation Procedures
→ Mechanical
Procedures and instructions in this section may require special
precautions to ensure the safety of the personnel performing
the operation. Refer to the following safety messages before
performing an operation preceded by this symbol:
Explosions can result in death or injury.
• Do not remove the transmitter covers in explosive
environments when the circuit is live.
• Verify that the operating atmosphere of the transmitter
is consistent with the appropriate qualification