Emerson Rosemount 702 - Choosing an Installation Location and Position

5
Reference Manual
00809-0200-4702, Rev CA
Section 1: Introduction
February 2013
Introduction
Figure 1-2. Locating Conduit Entries
Connecting the Field Communicator to the Power Module
The Power Module needs to be connected for the Field Communicator to interface with the 702
transmitter.
Figure 1-3. Field Communicator Connections
1.4.3 Choosing an Installation Location and Position
Choosing an Installation Location and Position
When choosing an installation location and position, take into account access to the
transmitter. For best performance, the antenna should be vertical with space between objects in
a parallel metal plane, such as a pipe or metal framework, as the pipes or framework may
adversely affect the antenna’s performance.
Conduit Entry
Conduit Entry
COMM
P/N 00753-9200-0020
1
2
3
4