Emerson Rosemount 702 - Fast Key Sequence; Removing the Power Module

62
Reference Manual
00809-0200-4702, Rev CA
Section 6: Configuration: Models 702DX32 and 702DX42
February 2013
Configuration: Models 702DX32 and 702DX42
6.4.4 Fast Key Sequence
Tab le 6 -1 lists the fast key sequence for common transmitter functions.
NOTE:
The fast key sequences assume that a current DD is being used: DD Rev 2 for dry contact inputs,
and DD Rev 1 for leak detection.
Table 6-1. 702 Fast Key Sequence
6.5 Removing the power module
After the sensor and network have been configured, remove the power module and replace the
transmitter cover. The power module should be inserted only when the device is ready for
commissioning.
Function Key Sequence Menu Items
Device
Information
1, 15 Manufacturer, Model, Final Assembly
Number, Universal, Field Device, Software,
Hardware Descriptor, Message, Date,
Model Number, I, II, III, SI Unit Restriction,
Country
Guided Setup 2, 1 Join Device to Network, Configure Update
Rate, Configure Sensor, Calibrate Sensor,
Configure Display, Configure Process
Alarms
Manual Setup 2, 2 Wireless, Process Sensor, Percent of Range,
Device Temperature, Device Information,
Device Configure, Other
Wireless 2, 2, 1 Network ID, Join Device to Network,
Configure Update Rate, Configure
Broadcast Power Level, Power Mode, Power
Source
Discrete Channel
Configuration
2, 2, 2 Discrete Channel Configuration