Emerson Rosemount 702 - Fast Key Sequence; Remove Power Module

15
Reference Manual
00809-0200-4702, Rev CA
Section 2: Configuration: Models 702DX22 and 702DX61
February 2013
Configuration: Models 702DX22 and 702DX61
2.5.3 Fast Key Sequence
Tab le 2 -1 lists the fast key sequence for common transmitter functions.
NOTE:
The fast key sequences assume that a current DD is being used: DD Rev 2 for dry contact inputs,
and DD Rev 1 for leak detection.
Table 2-1. 702 Fast Key Sequence
2.6 Remove Power Module
After the sensor and network have been configured, remove the power module and replace the
transmitter cover. The power module should be inserted only when the device is ready for
commissioning
Function Key Sequence Menu Items
Device
Information
2, 2, 4 Manufacturer, Model, Final Assembly
Number, Universal, Field Device, Software,
Hardware Descriptor, Message, Date,
Model Number, I, II, III, SI Unit Restriction,
Country
Guided Setup 2, 1 Join Device to Network, Configure Update
Rate, Configure Sensor, Calibrate Sensor,
Configure Display, Configure Process
Alarms
Manual Setup 2, 2 Wireless, Process Sensor, Percent of Range,
Device Temperature, Device Information,
Device Configure, Other
Wireless 2, 2, 1 Network ID, Join Device to Network,
Configure Update Rate, Configure
Broadcast Power Level, Power Mode, Power
Source
Discrete Input
Configuration
2, 2, 2 Discrete Input Configuration