59
Reference Manual
00809-0200-4702, Rev CA
Section 6: Configuration: Models 702DX32 and 702DX42
February 2013
Configuration: Models 702DX32 and 702DX42
6.4 HART Menu Tree
For ease of operation, changing setup, such as switch type, can be completed in several
locations.
6.4.1 Measurement Option Code 32, 42 (702DX32, 702DX42)
Figure 6-3. Field Communicator Menu Tree-Overview
Home
1 Overview
2 Configure
3 Service Tools
Overview
1 Device Status
2 Communication Status
3 Channel 1 Value
4 Channel 1 Status
5 Channel 1 count
6 Channel 1 Direction
7 Channel 2 Value
8 Channel 2 Status
9 Channel 2 Count
10 Channel 2 Direction
11 Update Rate 1
12 Update Rate 2
13 Update Rate 3
14 DD Revision
15 Device Information
Device Information
1 Identification
2 Revisions
3 Radio
4 Device Options
Identification
1 Device Image
2 Tag
3 Long Tag
4 Model
5 Serial Number
6 Date
7 Descriptor
8 Message
9 Model Number I
10 Model Number II
11 Model Number III
Device Status
1 Active Alerts
Active Alerts
1 Good- only if no alerts
2 Failed - Fix Now
3 Advisory
4 Maintenance – Fix Soon
Good- only if no alerts
1 No Active Alerts
Failed - Fix Now
1 Electronics Failure
2 Input/Output Failure
3 Radio Failure
4 Supply Voltage Failure
Maintenance – Fix Soon
1 Sensor Degraded
2 Terminal Temperature Out of Range
3 Calibration Error
4 Primary Out of Limits
5 Sensor Out of Range
6 Analog Output Saturated
7 Analog Output Fixed
Advisory
1 Electronics Warning
2 Electronics Temperature has Exceeded Limits
3 Module Temperature has Exceeded Limits
4 Supply Voltage Low
Device Options
1 Measurement Option
Revisions
1 HART
2 Field Device
3 Software
4 Hardware
5 DD
Radio
1 Manufacturer
2 Device Type
3 Device Revision
4 Software Revision
5 Hardware Revision
6 Transmit Power Level
7 Minimum Broadcast Update Rate
5 Security
Security
1 Write Protect
2 Lock Status
3 Over the Air Upgrade
To Next Page
Loading...
