17
MODEL SOLU COMP II SECTION 3.0
WIRING
FIGURE 3-6. Wiring Sensor with Standard Cable to
Model 1055 Analyzer (panel mount)
FIGURE 3-7. Wiring Sensor with Optimum EMI/RFI or
Variopol Cable to Model 1055 Analyzer (panel mount)
FIGURE 3-8. Wiring Sensor with Standard Cable to
Model 1055 Analyzer (pipe/wall mount)
FIGURE 3-9. Wiring Sensor with Optimum EMI/RFI or
Variopol Cable to Model 1055 Analyzer (
pipe/wall mount)
3.3 SENSOR CONNECTIONS
Refer to the table to select the correct wiring diagram.
1055 configuration Sensor cable Figure
Panel mounting Standard 3-6
EMI/RFI; Variopol 3-7
Wall/pipe mounting Standard 3-8
EMI/RFI; Variopol 3-9
To Next Page
Loading...
