MODEL SOLU COMP II SECTION 7.0
MAINTENANCE
Location in Shipping
Figure 7-1 PN Description Weight
1 23823-00 Panel mounting kit, includes four brackets and 2 lb/1.0 kg
four set screws
2 23837-00 Enclosure, front, for panel mount version, includes keypad 3 lb/1.0 kg
3 33654-00 Gasket, front, for panel mount version 2 lb/1.0 kg
4 note Screw, 2-56 x 0.187 in., with integral washer
5 23822-00 Display board, LCD 2 lb/1.0 kg
6 note PCB, microprocessor
7 note Screw, self-tapping, #4 x 0.375 in.
8 note PCB, power supply, 115/230 Vac or 24 Vdc
9 note Screw, 4-40 x 0.31 in., with integral washer
10 33658-00 Gasket, rear cover, for panel mount version 2 lb/1.0 kg
11 23838-00 Enclosure cover, rear, for panel mount version, 115/230 Vac 2 lb/1.0 kg
11 23838-01 Enclosure cover, rear, for panel mount version, 24 Vdc 2 lb/1.0 kg
12 note Self-tapping screws, #6 x 1.25 in.
TABLE 7-1. Replacement Parts for Solu Comp II (Panel Mount Version)
FIGURE 7-1. Exploded View of Solu Comp II (Panel Mount Version)
Note: Information about circuit boards and size of screws and washers is for information only. Circuit boards (other than the dis-
play board) and screws and washers cannot be purchased from Rosemount Analytical.
Shipping weights are rounded up to the nearest whole lb or 0.5 kg.
39
To Next Page
Loading...
