Emerson Rosemount SOLU COMP II - Default Settings

22
3. MISCELLANEOUS SETTINGS
Setting Default Section
Temperature unites °C 5.6
Automatic temperature correction On 5.6
Sensor input filter 5 sec 5.5
Language English 5.10
Hold Off 4.5
Security code 000 5.7
AC power frequency 60 Hz 5.8
MODEL SOLU COMP II SECTION 5.0
PROGRAMMING THE ANALYZER
TABLE 5-1. DEFAULT SETTINGS
1. OTHER OUTPUT SETTINGS
Output Assignment Range Current Dampening Mode Section
1 ozone 0 - 10 ppm 4 - 20 mA off linear 5.3 and 5.9
2 temperature 0 - 100°C 4 - 20 mA off linear 5.3 and 5.9
2. ALARM CONFIGURATION AND SETPOINTS
Alarm If AL3 is a
1 2 3 sensor alarm Section
Assigned to Ozone Ozone Fault Temperature 5.4
High or low High Low NA Low 5.4
Deadband 0.00 0.00 NA 0.00 5.4
Setpoint 10 ppm 0 ppm NA 0.00°C 5.4