5. Choose the desired language. Choose >> to show more choices.
6. Choose temperature units.
7. The main display appears. The outputs and alarms are assigned to default values.
8. To change outputs, alarms, and temperature-related settings, go to the main
menu and choose Program. Follow the prompts. For a guide to the Program
menu, see the menu tree on the following page.
9. To return the analyzer to the default settings, choose Initialize in the Program
menu.
Temperature in?
*
CC
*
F
4. When the analyzer is powered up for the first time, Quick Start screens appear. Using Quick Start is easy.
a. A blinking field shows the position of the cursor.
b. Use the or key to move the cursor left or right. Use the or key to move the cursor up or down or to
increase or decrease the value of a digit. Use the or key to move the decimal point.
c. Press ENTER to store a setting. Press EXIT to leave without storing changes. Pressing EXIT also returns the
display to the previous screen.
EEnngglliisshh
Fran ais
Espa ol >>
To Next Page
Loading...
