CONFIGURATION BUTTON
NOTE: You can access Thermostat Con gura-
tion settings at any time by pressing the
“Con guration” button.
18 19
Thermostat Con guration
Con guring the Thermostat
With the thermostat and HVAC unit powered, follow the con guration instructions
to correctly con gure the thermostat.
To ensure proper operation of the HVAC unit, complete the following steps.
➤ Pair the thermostat with the HVAC Controller
➤ Set the MESH ID;
➤ Enter the room number;
➤ Enter the equipment code;
➤ Con gure the energy saving settings;
➤ Set the thermostat clock
Thermostat Con guration
Accessing the Con guration Screen
➤ Ensure the thermostat is powered and faceplate removed;
➤ Press the con g button;
The thermostat con guration screens have a 30-second time-out. If no action is
taken within (30) seconds, the thermostat will exit con guration settings.
NOTE: When the thermostat is connected to a network, the equipment and
the energy saving settings con gured on the thermostat will be overidden by
settings con gured online.
To Next Page
Loading...
Need help?
General
