8 9
Before You Begin
Installation on a Bare Wall
➤ Select the appropriate installation location for the thermostat. Refer to
installation considerations section of this manual;
➤ With the faceplate removed, place the thermostat on the wall in the
installation location and mark location for drilling holes for the two (2)
mounting screws;
➤ Drill two (2) 3/16” holes in the wall and insert the two (2) supplied wall
anchors;
➤ Use the two (2) supplied screws to securely mount the thermostat to the wall;
➤ Insert two (2) AA-cell batteries (not supplied) into the thermostat battery
compartment.
Installation Using a Wallplate
➤ Select the appropriate installation location for the thermostat. Refer to
installation considerations section of this manual;
➤ Place the wallplate over the hole in the wall left by the previous thermostat,
and mark two locations for drilling holes;
➤ Drill two (2) 3/16” holes in the wall and insert the two (2) supplied wall
anchors;
➤ Mount the wallplate to the wall using the two (2) supplied screws.
➤ With the faceplate removed, place the thermostat on the wallplate in the
installation location and screw the thermostat onto the wallplate;
➤ Insert two (2) AA-cell batteries (not supplied) into the thermostat battery
compartment.
Before You Begin
To Next Page
Loading...
Need help?
General
