Emerson UNIDRIVE M600 - 5 Getting Started; Network Design Considerations; Ethernet Addressing Basics

Unidrive M600 Getting Started Guide 15
Issue Number: 2
Safety information
Product information
Mechanical
installation
Electrical installation Getting started Basic parameters Running the motor
NV Media Card
Operation
Further information
Table 2-9 Option modules, Keypad and additional options available
For more information refer to the Drive User Guide and the relevant option module user guide.
2.5.1 Parts supplied with the drive
Items such as control terminals, relay connector, 24 V power supply connector, grounding bracket,
surface mount brackets, grounding clamp, DC terminal cover grommets, terminal nuts, supply and
motor connector and finger guard grommets are provided with the drive. For more information refer
to the label on the accessory kit box supplied with the drive.
Type Name Further details
Fieldbus
KI-485 Adaptor
485 Comms Adaptor
485 Comms adaptor provides 485 communication interface. This
adaptor supports 115 k Baud, node addresses between 1 to 16
and 8 1 NP M serial mode.
SI-PROFIBUS
Profibus option
PROFIBUS adapter for communications with the drive.
SI-DeviceNet
DeviceNet option
DeviceNet adapter for communications with the drive.
SI-CANopen
CANopen option
CANopen adapter for communications with the drive.
SI-Ethernet
Ethernet option
External Ethernet module that supports EtherNet/IP and Modbus
TCP/IP
SI-PROFINET RT
PROFINET RT option
PROFINET adapter for communications with the drive.
SI-EtherCAT
EtherCAT option
EtherCAT adapter for communications with the drive.
Automation
(I/O
expansion)
SI-I/O
Extended I/O
Increases the I/O capability by adding the following
combinations: Digital I/O, Digital Inputs, Analog Inputs
(differential or single ended), Analog Output, Relays.
Feedback
SI-Encoder
Encoder option
Incremental encoder input interface module. Provides Closed
loop Rotor Flux Control for induction motors (RFC-A) on M600.
SI-Universal
Encoder
Universal Encoder option
Additional combined encoder input and output interface
supporting Incremental, SinCos, HIPERFACE, EnDAT and SSI
encoders.
Safety SI-Safety
Safety option
Safety module that provides an intelligent, programmable
solution to meet the IEC 61800-5-2 functional safety standard.
Keypad
KI-Keypad
LCD keypad option
Keypad with a LCD display.
KI-Keypad RTC
LCD keypad option
Keypad with a LCD display and real time clock.
Back-up
SD Card Adaptor
SD Card Adaptor
Allows the drive to use an SD card for drive back-up.
SMARTCARD
SMARTCARD
Used for parameter back-up with the drive.
Unidrive M600 Getting Started Guide English Iss1.book Page 15 Friday, April 25, 2014 2:08 PM