38 Unidrive M600 Getting Started Guide
Issue Number: 2
5 Getting started
This chapter introduces the user interfaces, menu structure and security level of the drive.
5.1 Understanding the display
The keypad can only be mounted on the drive.
5.1.1 KI-Keypad
The KI-Keypad display consists of two rows of text. The upper row shows the drive status or the
menu and parameter number currently being viewed. The lower row of the display line shows the
parameter value or the specific trip type. The last two characters on the first row may display special
indications. If more than one of these indications is active then the indications are prioritized as
shown in Table 5-1.
When the drive is powered up the lower row will show the power up parameter defined by Parameter
Displayed At Power-up (11.022).
Figure 5-1 KI-Keypad
1. Escape button
2. Start reverse (Auxiliary button)
3. Start forward
4. Navigation keys (x4)
5. Stop / Reset (red) button
6. Enter button
The red stop button is also used to reset the drive.
Unidrive M600 Getting Started Guide English Iss1.book Page 38 Friday, April 25, 2014 2:08 PM
To Next Page
Loading...
