Unidrive M600 Getting Started Guide 33
Issue Number: 2
Safety information Product information
Mechanical
installation
Electrical
installation
Getting started Basic parameters Running the motor
NV Media Card
Operation
Further information
Figure 4-6 Size 9E and 10 power and ground connections
A separate line reactor (INLXXX) must be used for size 9E and 10. Failure to provide
sufficient reactance could damage or reduce the service life of the drive. Refer to
Table 2-8 Size 9E and 10 model and line reactor part numbers on page 12.
Input connections
Mains
Supply
L1 L2
Line reactor
Optional
EMC filter
Fuses
L3
L1 L2 L3
PE
Supply
ground
UVW
Motor
Optional ground
connection
+DC BR
Thermal
overload
protection
device
Output connections
9E
10
Unidrive M600 Getting Started Guide English Iss1.book Page 33 Friday, April 25, 2014 2:08 PM
To Next Page
Loading...
