Emerson VCR872 - Setting the Video Channel

being used for TV broadcasts in vou area.
WHEN THE TV PICTURE IS NOT CLEAR
SELECT ANY VCR CHANNEL
RF converter will convert
the recorded or playback
signal into the TV RF
(Radio Frequency) signal.
RF signal from VCR comes
into a TV set with channel 3
or 4 (VIDEO CHANNEL).
usin? the VCR CHANNEL
SELECT BUTTON.
3J Press the VCRTTV
SELECT SWITCH
to VCR position.
• 'VCR' will light up on
SETTING THE VIDEO P resetting the channel 10.11
PUAMMEI CLOCK ADJUSTMENT 12.
LzllMI'iINCL. LOADING THE CASSETTE 13
TO VIEW THE PLAYBACK OF A RECORDED TAPE, OR TO WATCH A PROG 
RAM SELECTED BY THE VCR ’ S CHANNEL SELECTOR, THE TV SET MUST
BE SET TO CHANNEL 3 OR 4 (VIDEO CHANNEL).
f RF CONVERTER — — s
(J) TURN ON VCR (g) Set the 3M CHANNEL SELECT SWITCH to CH 3 or 4 whichever is not
CH4
CH3
4- 4-
4-
All channels are
not clear.
A certain channel does
not appear.
*" 1 ”
No picture on any
channel.
4-
X
x
r 1
In areas of weak recep 
tion, connection of VCR
causes bad picture
reception.
-Use the optional VHF
Antenna Booster.
A Certain VCR Channel
is not tuned.
-See Page 10-11.
>■
TV set is not set to
Channel 3 or 4.
-Tune your TV set
to the Video Chan 
nel (3 or 4).
9
PREPARATION