Emerson VCR872 - Playback

PLAYBACK
TO PLAYBACK A PRE-RECORDED CASSETTE TAPE PROCEED AS FOLLOWS:
PREPARATION
• Turn on the TV POWER switch and set to the video channel 3 or 4.
• Make sure that the TIMER REC switch is off.
• Make sure that the timer display shows the present time correctly.
To stop playback.
Press the STOP button.
TRACKING ADJUSTMENT
REW I
soft sharp
NOTE
IF NOISE BARS APPEARS IN THE PICTURE DURING PLAYBACK,
ADJUST THE TRACKING CONTROLS AS SHOWN.
Adjust the TRACKING
control to achieve the
best picture.
Remember to return the TRACKING control to the click 
stop position after use.
When a cassette tape which has the
prevention tab removed is inserted,
playback will start automatically.
Press the REW button or FF button.
• Make sure that the tape is in STOP
mode, then press the REW button or
FF button.
To rewind or forward the tape rapidly.
TRACKING
— 24 —