Emerson VCR872 - Page 19

TO CONFIRM OTR TIME
NOTE
Press END(+) button until the desired
time appears on the display.
Keep pressing both buttons simultane 
ously for about 2 seconds.
OTR and REC indicators on the display
go off.
When going out before
starting TV program.
When staying in bed
before starting TV prog 
ram.
NOTE
• During the OTR, it is impossible to operate any
functions.
• When the tape reaches its end during the OTR
the VCR will turn itself off. The tape will not
automatically rewind.
• POWER FAILURE OR UNPLUGGING THE AC
CORD AFTER SETTING OTR
Since the built-in circuit continues to work for 30
minutes, the recording will return if the power
resumes within 30 minutes. If the power
resumes in over 30 minutes, you have to set
the present time (see page 12) then set OTR
again.
— 17 —