Emerson VCR872 - Page 21

CHANNEL
ton.
NOTE
SET NORMAL but 
ton to return to cur 
rent time on the tinier
Start and stop times
Channel
The number and kind of cassettes
Take into consideration of replacement of cassette
• The VCR starts recording automatically before 20 seconds at
desired start time and stops recording automatically at desired
stop time.
• Set the TIMER REC switch to off if you wish to stop before or
after the timer recording is completed. If the VCR is stopped in
the middle of the timer recording, the preset time remains
programmed.
• After setting the TIMER REC switch to on, the unit is automat 
ically turned off except OTR.
• To turn the unit on, set the TIMER REC button to off.
If the cassette without tab is inserted, the cassette is automat 
ically ejected to warn you.
• It means that the cassette cannot be recorded.
When the tape reaches its end during the TIMER REC, the
VCR will turn itself off.
• The tape will not automatically rewind.
, TIMER
REC
CHECK THE FOLLOWING ITEMS BEFORE
SETTING TIMER RECORDING
The day ol (ho week required and whether everyday or
ovory week
8) Set the TIMER REC
button to ON.
R) Set the TAPE SPEED
SELECT switch to
l SP ’ ‘ LP ’ or ‘ EP ’ .
CHANGE OF THE TIMER DISPLAY
• Pressing DAY button
(SU — >MO — >TU — >WE — > .... )
• Pressing START and END buttons
(+)..advance(00 — >01 — >02 — »..)
(-)..reverse(00 — >59 — >58 — ►..)
When a button is pressed quickly and
repeatedly, the indication will change in 1-
minute steps. When it is kept pressed, the
indication will change in 10-minute steps.
the channel 'UP(A)'
— 19 —