Need help?Do you have a question about the Emerson XC1015D and is the answer not in the manual?
General| Model | XC1015D |
|---|---|
| Series | XC |
| Product Type | Control Unit |
| Communication Protocol | Modbus RTU |
| Communication | RS-485 |
| Mounting Type | DIN Rail |
| Protection | Overload, Short Circuit |
Instructions to read the manual before use for proper reference.
Crucial safety measures to follow before and during instrument operation.
Detailed wiring diagram and connection points for the XC1008D model.
Detailed wiring diagram and connection points for the XC1011D model.
Detailed wiring diagram and connection points for the XC1015D model.
Describes the initial display screen when the keyboard is connected.
Explains the different elements shown on the controller's display screen.
Details how to access and navigate the programming menus.
Procedure to access the service menu from the main display.
Instructions for programming the unit using a Dixell HOT KEY.
Guide to viewing the status of the controller's analog outputs.
Detailed wiring diagram and connection points for the XC1008D model.
Explanation of the various wiring terminals and their functions.
Describes the initial display screen when the keyboard is connected.
Procedure for entering a password to access the Pr2 parameter menu.
Procedure to access the service menu from the main display.
Guide to viewing the status of the controller's analog outputs.
Steps to disable or enable outputs during maintenance.
How to view the operational hours logged for each load.
Accessing the menu to view currently active alarms on the display.
Configuration of compressor rack setup, including kind of plant and probe usage.
Configuration of regulation types, rotation, and fan control for compressor circuits.
Settings for display units and pressure display mode.
Setting the neutral zone for compressor regulation, affecting load activation.
Regulation details for screw compressors of specific brands, including relay activation.
How analog outputs manage compressors driven by an inverter, showing output behavior.
Comprehensive table detailing alarm codes, causes, actions, and resets.
Physical dimensions and mounting specifications for the XC1000D unit.
Physical dimensions and mounting specifications for the VG810 accessory.
Specific instructions for connecting pressure and temperature probes.
To Next Page