Emerson XWEB500D User Manual

1592028010 XWEB300D_500D_500 EVO STP GB r1.2 12.06.2017.doc XWEB3000/5000 EVO 12/22
Technical features
Power supply
24V or 100-230V (DIN models)
230V (“COOLMATE” models)
Power
15VA Max (DIN models)
20VA Max (“COOLMATE” models)
Maximum voltage and current that can be applied to
the AUX1-2-3 terminals.
24V
Operating conditions (temperature, humidity, special
conditions)
T: 10-60°C R.H.20-85% (non-condensing) (DIN
models)
T: 0-60°C, R.H. 20-85% (non-condensing)
(“COOLMATE” models)
Electrical safety (reference standards)
Standard EN 60950-1
Electromagnetic compatibility (reference standards)
Immunity
EN 61000-6-2:2005
EN 55024:1998 + /A1:2001 +/A2:2003
EN 61000-4-2:2009
EN61000-4-3:2006 +/A1:2008
EN61000-4-4:2004
EN 61000-4-5:2006
EN 61000-4-6:2009
EN 61000 -4 -8:1993 +/ A1:2001
EN 61000-4-11:2004
Emissions
EN 55022:2006+/A1:2007
EN 61000-3-2:2006 +/A1:2009 +/A2:2009
EN 61000-3-3 :2008
Internal modem: list of supported countries
Argentina
France
Latvia
Russia
Australia
Germany
Liechtenstein
Singapore
Austria
Greece
Lithuania
Slovak Republic
Belgium
Hong Kong, S.A.R.of
China
Luxembourg
Slovenia
Brazil
Hungary
Malaysia
South Africa
Canada
Iceland
Malta
Spain
Chile
India
Mexico
Sweden
China
Indonesia
Netherlands
Switzerland
Cyprus
Ireland
New Zealand
Taiwan
Czech Republic
Israel
Norway
Thailand
Denmark
Italy
Philippines
Turkey
Estonia
Japan
Poland
United Kingdom
Finland
Korea
Portugal
United States
CAUTION:
The terminal block to connect AUX1, AUX2 and AUX3 relays
cannot be used to pilot high voltage loads directly (higher than
24V). Use an intermediate low voltage circuit and/or suitable
remote switch.

Emerson XWEB500D Specifications

General

Brand	Emerson
Model	XWEB500D
Category	Controller
Language	English