10Status Bar
Status Icons: System Status
Cooling
2nd Stage Cooling
SmartCirculation
Circulation (fan)
No activity, the system is in setup mode
No activity, the system is improperly
con gured
Status Icons: System Status
A small clock by the upper left of the status
icon indicates the system is heating, cooling,
or circulating because of SmartRecovery.
The system is waiting for the compressor
cycle timer to expire
One or more zones are calling for heat at the
same time as one or more zones are calling for
cooling or waiting for additional zones to call
for heating / cooling.
The system has not received a valid reading
from a sensor within 10 minutes.
To Next Page
Loading...