EMME Core - System Modes

13 Smart Thermostat Panel
Override Down Arrow:6. Temporarily decreases the
temperature setpoint.
Fan Mode:7. Displays the current fan mode which can
be on or auto.
Sy
stem Mode:8. Displays the current system mode; the
options are: o , heat, cool, and auto.
Curr
ent Humidity:9. If a humidi er is con gured you
may see something such as: 29% humidity >> 35%
this indicates the curr
ent humidity is 29% and the
setpoint is 35%.
Current Temperature: 10. This can be the temperature at
the display or the temperature from a reference sensor.
Reference Sensor:11. Displays the name of the sensor
that is being used as the reference temperature for
current operations; inside indicates the reference
sensor is the displa
y
.
System Modes
o The system is o , there will be no heating or
cooling, although circulation may still run
heat The system will only heat or circulate
cool The system will only cool or circulate
auto The system will automatically switch between
heating, cooling, and circulation depending on
your set points