EMME Core - Disabling Password Protection

46Password Protecting the Display Touch Screen
3
Enter Your
Password
Press ok when you are
 nished.
NOTE: Write down your password and keep it
somewhere for later reference. Once the system is
password protected, access can only be gained by
entering the password.
The password is case sensitive; ensure
the password is entered correctly, using any letters,
numbers or symbols that are required.
The system will remain unlocked until the screen dims, after
which it will need to be unlocked with the password to gain
access.
Disabling Password Protection
1
Press the
password Button
You may need to scroll
right to  nd it. The
password screen should
appear.
2
Press Clear
Display Password