EMME Core - The Real-Time Graph

63 Overriding a Zone Temperature
Canceling an Override Using the Display
and Control Unit
You can cancel an override initiated from the Display and
Control Unit or Smart Controller in the same manner. The
Smart Controller will continue to  ash between SET and
your new setpoints after it is canceled from the display.
Select the
Zone with the
Override
You can tell which zone
has an override applied
because the setpoints
are in green.
1
Press Cancel
The override
button should
now read cancel, press
Cancel.
2
Using the Smart Controller to Override
the Current Schedule
Press the
up or down
buttons on the
Smart Controller
1
Check the
Override
temperatures
The current setpoints
are green to show this
is an override. When
 nished press Done.
2