53 Wireless Sensors
Canceling an Override
The override can be canceled from the Smart Controller. To
cancel an override do the following:
Press the
Circle Button
To cancel an override,
simply press the large
button with the circle
on it.
1
Press the button with a circle
Setting SAVER Mode
from a Smart Controller
If a Smart Controller is set to Primary you can use it to
enable SAVER mode. You cannot turn the system OFF from
a Smart Controller, you can only enable SAVER which uses
your AWAY settings.
1
Press the
Circle Button
When the Smart
Controller in ON and not
in an override, pressing
the circle button enables
SAVER Mode.
Press for SAVER mode
Smart Controller is ON
SAVER
Mode Enabled
The Smart Controller will
now display SAVER in the
lower left corner. Your
AWAY settings will now
be in e ect.
2
To Next Page
Loading...