EMME Core - Canceling SAVER Mode Using a Smart Controller

65 SAVER Mode
Putting a Zone in SAVER Mode
Using a Smart Controller
Press for SAVER mode
Smart Controller is ON
1
Press the
Circle Button
When the Smart
Controller in ON and
not in an override,
pressing the circle
button enables SAVER
Mode.
2
Press the
Circle Button
The Smart Controller
will now display SAVER
in the lower left corner.
Your AWAY settings will
now be in e ect.
Canceling SAVER
Mode Using a Smart Controller
In SAVER mode
Press the circle button
1
Press the
Circle Button
When the Smart
Controller is in SAVER
mode press the circle
button to disable it.
Smart Controller is ON
2
SAVER
Mode Disabled
The Smart Controller
will now display ON
indicating SAVER mode
is no longer in e ect in
this zone.