EMME Core - Connecting to Emme Via Web Portal; Configuring Email and Password

23 Emme Internet Setup and Connectivity
3
Press Edit
4
Change the
Addressing to
Manual
Use the multi-selector to
change the Addressing
from Automatic (DHCP)
to Manual
5
Press Edit across
from IP Address
6
Enter the IP
Address
Use the number pad to
enter the IP Address.
Press ok when you’re
 nished.
7
Finish the
Manual
Addressing Setup
Repeat Step 5 and 6 with
the Remaining Options.
8
Double Check
Your Settings
When you’re  nished
press Ok.