71
GBGB
7. INFRARED REMOTE CONTROL
7.9 Programming the Timer
Switch on the air conditioner program
Press
button
once
Result: ON 12:00 flashes on the display.
2 Press the
buttons
Result: 1 minute Increase or decrease every time you press
the button. By pressing the button for a second and a half time
increases or decreases by 10 minutes. By pressing ad holding
the button it increases or decreases of 1 hour.
.
3 Once the time at which you want to turn on the
unit appears on the LCD display, press
to confirm.
Result: You will hear a “beep” signal. “ON” will stop flashing and
remains visible. TIMER indicator of the indoor unit switches on.
(option not valid for some models).
4 On the remote control, after 5 seconds display of the timer set,
the clock will be displayed again.
How to cancel TIMER ON
Press again
button
Result: A “beep” signal will announce its cancellation and the
indicator will disappear from the display.
Note: In the same way it is easy to set the timer for AUTOMATIC
SHUTDOWN TIMER OFF
, so that the device switches off at
the desired time .
To Next Page
Loading...
Need help?
General
