Emotiontek MCU 2 Axis - 6.4 MCU-L

- 122 -
Chapter 6. Connection
6.4 MCU-L
1) I/O Connector
- Counter Connector: HDBB-25P/HIROSE (P: Power, I: Input, O: Output)
Note)
a) The input contact of this product can be entered from 2 types of NPN and PNP, so 2 types
of sensors such as NPN and PNP can be used for an input contact.
b) For the extended I/O No.1, the input contact(IN0~IN11) is allotted as X3.4~X3.F and the
output contact(OUT0~OUT9) as Y1.E~Y2.7, and for the extended I/O No.2, the input
contact(IN0~IN11) is allotted as X5.4~X5.F and the output contact(OUT0~OUT9) as Y3.E~Y4.7.
Pin arrangement Pin No. I/O Signal name Content
1 I INCOM0 Input contact Common 0(IN0~IN5)
14 I IN0 Input contact 0
2 I IN1 Input contact 1
15 I IN2 Input contact 2
3 I IN3 Input contact 3
16 I IN4 Input contact 4
4 I IN5 Input contact 5
17 I INCOM1 Input contact Common 1(IN6~IN11)
5 I IN6 Input contact 6
18 I IN7 Input contact 7
6 I IN8 Input contact 8
19 I IN9 Input contact 9
7 I IN10 Input contact 10
20 I IN11 Input contact 11
8 O OUT0 Output contact 0
21 O OUT1 Output contact 1
9 O OUT2 Output contact 2
22 O OUT3 Output contact 3
10 O OUT4 Output contact 4
23 O OUT5 Output contact 5
11 O OUT6 Output contact 6
24 O OUT7 Output contact 7
12 O OUT8 Output contact 8
25 O OUT9 Output contact 9
13 I OUTCOM Output contact Common(OUT0~9)